FIND PRODUCTS BY CATEGORY
  • POST for Fairing Windshield

    Why your sunglasses get blown off at highway speeds – and how to fix it?

    A Street Glide rider on the Harley Davidson Forums recently mentioned that at highway speeds, the wind gets so strong it blows his sunglasses right off. Chances are, many of you have experienced the same thing.

    The root cause is simple: most Street Glide windshields are in the 6″ to 8″ range. That height does little to protect your face. At speed, the concentrated airflow hits you right in the face, which can not only knock off your shades but also make it harder to breathe comfortably.

    To solve this, you need to redirect the air over the top of your helmet.

    Option one – swap your current windshield for a taller one, typically 9″ to 10″ or even higher. A taller shield pushes the air up and over your head. The downside? A very tall windshield can throw off the classic low-profile look of the Street Glide fairing.

    Option two – go with a windshield that’s engineered with better aerodynamics. Look for a curved or recurved top edge designed to lift the airflow without adding excessive height. This reduces wind blast on your face, so you don’t have to worry about losing your sunglasses at highway speeds – and you keep the sleek, aggressive stance of your bike.

    If that sounds like the solution you’ve been searching for, take a closer look at this windshield. It was built specifically to solve the airflow issues riders like you face every time you roll on the throttle.

  • POST for CarPlay Adapter

    Why your Skyline OS won’t play iPhone navigation voice through the Harley motorcycle’s speakers – and how to fix it?

    A Harley rider recently ran into this problem: he wanted to play iPhone turn-by-turn navigation voice through the motorcycle’s speakers, but nothing came out.

    Let’s break down why this happens. The key lies in how Skyline OS handles connected devices. To enable Apple CarPlay, the system requires a Bluetooth headset (a helmet headset, a Bluetooth adapter, or a Cardo etc.) to be connected as a “microphone”. This is a hard requirement from Apple’s CarPlay architecture. As a result, navigation voice is routed to that headset – not to the bike’s built‑in speakers.

    So, is there a way to force the navigation voice and music to play through the fairing speakers instead?

    Yes, there is a proven workaround. You can wire a standalone Bluetooth adapter to the bike (using a wired connection), then pair your iPhone with that adapter’s signal. Once set up, the adapter tricks the system into sending audio to the motorcycle’s speakers. Both navigation prompts and music will play clearly through the handlebar-mounted speakers.

    And here’s another bonus: you no longer have to buy Harley’s official onboard maps. Last time I checked, the map license cost $349.95 for three years – money you can now save.

    If you’re looking for exactly this kind of solution, check out the CarPlay Adapter featured below. It connects via your iPhone to CarPlay and lets you enjoy navigation voice and music the way it should be – through your bike’s speakers.

Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST
Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST - Image 2
Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST - Image 3
Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST - Image 4
Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST - Image 5
Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST - Image 6
Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST - Image 7
Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST - Image 8
Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST - Image 9
Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST - Image 10
Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST - Image 11
Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST - Image 12

Crash Bar Engine Guard | Harley Softail Models with Mid-Control Footpegs 2018-after Low Rider Low Rider S Street Bob Street Bob Special / 2022-after Low Rider ST

Price range: $78.99 through $529.99

- +
SKU: B3H0517 Categories: , , ,
Guaranteed Safe Checkout

✅[Wide Compatibility ]: Direct bolt-on fit for 2018-after Harley Softail mid-control models, including Low Rider, Low Rider S, Street Bob, Street Bob Special and 2022-after Low Rider ST with a seamless, hassle-free installation using factory mounting points.

✅[288mm Extended Crash Protection ]: One-piece design extends 288mm outward, delivering far superior body and engine protection than traditional guards, effectively safeguarding your motorcycle during tip-overs and crashes.

✅[Dual End Cap Options ]: Choose between traditional solid end caps or skate wheel end caps. The skate wheel design provides superior shock absorption, effectively reducing vehicle damage during a fall.

✅[Precision Materials ]: Precision CNC machined from high-strength 6061-T6 aerospace aluminum alloy, with sharp CNC lines for a premium mechanical aesthetic and exceptional structural rigidity.

✅[Durable Anodized Finish ]: Hard anodized surface treatment creates a dense protective oxide layer, significantly enhancing corrosion resistance, wear resistance, and long-lasting color retention, available in multiple custom color options.

Parts

Front Crash Bar Slider, Front Crash Bar with Black Slider, Front Crash Bar with Gold Slider, Front Crash Bar with Red Slider, Front Crash Bar with Wheel Slider, Rear Crash Bar, Rear Crash Bar Slider, Wheel Slider

Color

Black, Blue, Gold, Purple, Red

Related products

Let’s Build Your Dream Bike!

Please tell us how you’d like to customize your motorcycle, and we’ll be happy to assist you.

Let's Talk!
Shopping Cart
Scroll to Top

Contact Us